Regardless of the sector or kind of work being done, every employer has a duty to protect the health and safety of their employees. Construction employees operate in a high-risk workplace that is vulnerable to electrical hazards and the risks associated with construction equipment hence it is mandatory to follow construction safety rules. Actually, according to SafeWork NSW, “approximately 25,000 employees sustained injuries on NSW construction sites in the previous three years owing to dangerous work conditions. 23 employees lost their lives, and 1700 suffered lasting impairments. Working on construction sites is risky.
Here are 7 important construction safety rules to follow;
1. Using A Safety Training Program, Manage And Reduce Risk
Because construction work involves danger, all personnel need to get training and instructions on how to identify high-risk locations for effective emergency management. Although the danger cannot be totally eliminated, training programs may teach site personnel to do frequent safety assessments. They will be able to recognize possible dangers, deal with them, and significantly reduce the likelihood of injuries, guaranteeing a safe working environment. Safety Training Program is one of the important construction safety rules.
2. Provide Personal Protective Gear
To minimize exposure to the numerous risks present on the Jobsite, all employees and visitors at the construction site must don the necessary PPE. Goggles, helmets, gloves, earplugs or muffs, boots, high visibility vests, and suits are examples of common PPEs.
Depending on the nature of the task, an employer must provide his employees with the required PPE, such as a safety harness, safety goggles, head protection equipment, and fall protection. Providing PPE on sites is one of the important construction safety rules.
3. Pay Attention And Follow Signs
Safety signs provide management the opportunity to inform and increase visitors’ and workers’ understanding of health and safety. Where required, strategically deploy them across the area.
Construction safety rules and various signs, such as warnings, prohibitions, safe conditions, and fire fighting equipment signs, should be known to workers.
4. Keep The Site Tidy
Verify that there aren’t merely laying about the site dirt, dust, loose nails, and stagnant water. To avoid slips and accidents, the building site has to be cleaned every day and kept clear of debris. Construction sites are untidy. Don’t be deceived; slipping and falling may not appear like a significant issue in comparison to other high-risk tasks taken on on the site. Slips and trips made up 30% of the defined significant injuries on construction sites, according to HSE figures. To lessen the risk of slip and trip risks, keep your work environment neat during your shift. Pay close attention to things like entry points and evacuation routes. These are very important rules from construction safety rules and regulations.
5. Put In Place Stringent Security And Safety Procedures
Access to the construction site should be restricted to safeguard the machinery and heavy equipment from theft and damage. In order to protect pedestrians from possible risks at a building site, rigorous monitoring is necessary while the job is being done. To protect contractors against liabilities, security breaches, and lawsuits resulting from safety carelessness, stringent safety rules should be maintained, and only authorized visitors should be permitted on the property. Observe the construction safety rules and signage.
During your orientation, they need to be conveyed to you. Your employer is responsible for making sure a risk analysis is done for your actions. Be careful you read it and comprehend it. For your protection, control measures are put in place. Before you begin, make sure they are set up and functioning properly.
6. Don’t Ever Work In Dangerous Areas
Ensure the safety of your workspace. Be aware of your surroundings. Be mindful. According to HSE data, 11 percent of construction-related deaths were from being hit by a moving vehicle, and 14 percent from anything falling or flipping. Avoid working at heights without appropriate guardrails or other fall protection measures.
Never go into an unsupported trench. Ensure that you have secure access. Work above crane loads or engage in any other risky activities. It is mandatory to follow construction safety rules to avoid construction-related accidents.
7. Proper Equipment Usage
If anything is broken or doesn’t seem right, report it in accordance with rule 7. If you aren’t taught to or aren’t meant to, don’t attempt to push anything or change something. Never take down scaffold ties or guardrails. Keep machine guards in place. If you are not qualified to repair faulty equipment, do not try. Never meddle with machinery without permission. Make sure the tools and equipment are in good condition before you start working. Misuse of a tool or piece of equipment is a common cause of accidents. Don’t use improvised tools. Use the proper instrument to do the task instead to make it faster and safer. No one solution works for everyone.
It will be completed more quickly and, most importantly, safely, if the appropriate instrument is used. Before you begin, make sure the equipment is in excellent shape and is safe to use. On site, only use 110v equipment. Without prior management approval, using 240v equipment is absolutely forbidden. It will only be utilized in cases when there is no other option for 110v and further safety measures are implemented. Make sure there are no tools laying about, and disconnect all lights and power equipment. Following construction safety rules on sites can assist avoid damage to equipment or even worker injuries. Putting them in their proper locations will help make navigating simpler.
These construction safety rules and regulations are a fantastic place to start when putting out a safety program and making sure electrical safety is upheld on construction sites.